MODELA MDX-50 - Roland

Data sheet

Cuttable material

Resins such as chemical wood and modelling wax (metal not supported), substrates for machining

X, Y, and Z operation strokes

203.2 (X) x 152.4 (Y) x 60.5 (Z) mm.

Distance from collet tip to table

Maximum 130.75 mm.

Table size

232.2 (X) x 156.6 (Y) mm.

Loadable workpiece weight

2 kg.

X-, Y-, and Z-axis drive system

Stepping motor

Operating speed

6 - 1800 mm./min.

Software resolution

0.01 mm/step (RML-1), 0.001mm/step (NC code)

Mechanical resolution

0.000998594 mm/step

Spindle motor

DC motor Type 380

Spindle rotation

7,000 rpm.

Cutting tool chuck

Collet method

Interface

USB

Control command sets

RML-1, NC code

Power requirements

Machine: D C24V, 2.5 A, Dedic ated AC adapter: AC 100 -240 V±10%, 50 /60Hz

Power consumption

Approx. 55W

Acoustic noise level

During operation: 65 dB (A) or less (when not cutting), during standby: 45 dB (A) or less

Dimensions / Weight

451.0 (W) x 426.6 (D) x 426.2 (H) mm / 19.6 kg

Environment

Temperature of 5 to 40°C, 35 to 80% relative humidity (non-condensing)

Included items

AC adapter, Power cord, USB cable, Cutting tool, Collet, Set screw, Spanners (7,10 mm), Hexagonal wrench (size 2,3 mm), Positioning pins, Double-sided tape, Start- up information card